Philips Hue Play Gradient Lightstrip for PC Mounts: Setup FAQ
By Smart lights and home security | Philips Hue | Published: 2026-11-01
Category: How-to Guides
Get clear answers to the most common questions about mounting and setting up the Philips Hue Play gradient lightstrip on your PC monitor, from adhesive tips to Hue Sync basics.
Quick answer
Mount the lightstrip using the included black mounts with 3M adhesive backing, then connect it to your Hue Bridge and set up Hue Sync on your PC for gradient lighting that follows your screen.
Why the right mounts matter for gradient lighting
Gradient lightstrips project multiple colors at once, so the strip needs to sit at a consistent distance from the monitor back to blend properly. The dedicated Play gradient lightstrip mounts are shaped to hold the strip at the correct offset, which helps avoid hotspots or uneven color spills. Using generic clips or tape can work temporarily, but they may not keep the strip flat or secure over time.
When adhesive mounts are not enough
3M adhesive backing holds well on clean, smooth surfaces like most monitor backs, but textured or curved surfaces may reduce grip. If your monitor has a heavily vented or curved back, consider adding small pieces of double-sided mounting tape to supplement the adhesive, or use cable management clips to relieve strain on the strip. Avoid mounting on surfaces that get hot or are frequently adjusted.
Frequently asked questions
- How do I prepare my monitor before mounting the lightstrip?
- Clean the back of your monitor with a lint-free cloth and rubbing alcohol to remove dust and oils. Let it dry completely before applying the mounts. Press each mount firmly for 30 seconds and let the adhesive cure for a few hours before attaching the lightstrip. A clean, dry surface is critical for the 3M adhesive to hold securely.
- Can I cut the lightstrip to fit my monitor?
- No, the Play gradient lightstrip is not cuttable. It comes in specific lengths designed for common monitor sizes. If the strip is longer than your monitor, route the excess along the back edge or secure it with cable clips to keep it out of sight. Never cut the strip; plan the layout so excess length is hidden.
- What do I need to set up Hue Sync on my PC?
- You need a Philips Hue Bridge, the Hue Sync desktop app, and the lightstrip connected to your Hue system. Install Hue Sync, create an entertainment area that includes the lightstrip, and start syncing. The app will mirror your screen colors to the lights. A Hue Bridge is required for Hue Sync; Bluetooth-only setups won't work.
- How do I keep the lightstrip from peeling off?
- Avoid touching the adhesive after application and keep the monitor back free of dust. If a mount starts to lift, press it back down firmly. For extra security, use a small piece of clear tape over the mount or add a cable clip near the end of the strip to reduce tension. Regularly check the mounts and re-press any loose edges.
- Where should I place the lightstrip for the best gradient effect?
- Center the strip horizontally along the back of the monitor, about 1-2 inches from the edge. This position allows the colors to spread evenly across the wall behind. Avoid placing it too close to the monitor's vents or ports. Centering the strip ensures balanced color distribution.
Product facts
- Philips Hue Play gradient lightstrip for PC mounts: These black mounts use 3M adhesive backing to attach a Play gradient lightstrip to the back of your PC monitor. They provide a secure, tool-free way to position the strip for even light diffusion without drilling or permanent modifications.
Philips Hue Play gradient lightstrip for PC mounts
