What the Perifo Straight Wall Base Kit with Large Light Tube Includes
The Perifo Straight Wall Base Kit with Large Light Tube is a wall track lighting system in black. It includes one large gradient light tube, two 39.4 inch rails, a power supply unit with a plug for a wall outlet, and connectors to create a straight line. Knowing these components helps you plan the wall layout and understand what you’ll be working with before you start mounting.
Planning Your Wall Layout with the 39.4 Inch Rails
Because the kit includes two 39.4 inch rails, you can create a straight line of light along your wall. Before you mount anything, measure the wall space where you want the track to go. The rails are meant to be connected end-to-end, so the total length will be the sum of the two rails plus any small gap needed for connectors. Mark the desired position on the wall, keeping in mind that the power supply plugs into a standard wall outlet, so the track should be placed within reach of an outlet.
Kit Contents and What They Mean for Mounting
- Perifo straight wall base kit (1 light tube large): This wall track lighting kit in black includes one large gradient light tube, two 39.4 inch rails, a PSU with a plug for a wall outlet, and connectors to create a straight line. The two rails determine the maximum straight run you can create, and the plug-in PSU means you need to plan for a nearby wall outlet rather than hardwiring.

Perifo straight wall base kit (1 light tube large)
Mounting Steps for the Perifo Straight Wall Base Kit
Follow these general steps to mount the kit. Always refer to the manufacturer’s instructions that come with the product for specific torque values, spacing, and safety warnings.
- 1. Choose the wall location: Select a spot that is within reach of a wall outlet and has enough flat wall space for the two 39.4 inch rails end-to-end. Mark the mounting holes using the rails as a template.
- 2. Attach the rails: Secure the two rails to the wall using appropriate wall anchors and screws (not included). Make sure the rails are level and aligned to create a straight line.
- 3. Connect the rails: Use the included connectors to join the two rails together, ensuring a secure fit. Follow the manufacturer’s instructions for proper connector placement.
- 4. Install the light tube: Slide the large gradient light tube into the track, ensuring it clicks into place. The tube should be oriented correctly to achieve the desired gradient effect.
- 5. Connect the power supply: Plug the PSU into a wall outlet and connect it to the track as instructed. Turn on the power and test the light.
Key Checks Before You Mount
Before you start drilling, verify that the wall material can support the weight of the track and light tube. For drywall, use appropriate anchors. For masonry or tile, you may need special drill bits and anchors. Also, confirm that the wall outlet is functional and that the PSU plug can reach it without stretching the cord. If you are unsure about any part of the installation, consult a qualified electrician. The kit is designed to plug into a standard outlet, so no hardwiring is required, but always follow local electrical codes.
Trade-offs to Weigh Before You Buy
The Perifo Straight Wall Base Kit with Large Light Tube offers a sleek, linear lighting solution that plugs into a wall outlet, making installation more accessible than hardwired systems. However, the large gradient light tube is designed for a straight line only, so if you want an L-shaped or more complex layout, you would need additional kits or connectors. Also, the kit includes only one light tube, so you’ll need to purchase additional tubes if you want to fill the entire track. Consider your wall space and desired lighting effect to decide if this kit meets your needs.

