What the Perifo L-Shaped Kit Includes
The Philips Hue Perifo L-shaped ceiling base kit (2 spots, 1 light bar) is designed to fit a corner of your kitchen. The package contains two cylinder spotlights, one linear light bar, two 59.1-inch rails, one 39.4-inch rail, a power supply unit (PSU) that sits between two rails, and connectors to form an L shape that turns to the right. Knowing these parts helps you plan the layout before installation.
Kit Contents at a Glance
- Perifo L-shaped ceiling base kit (2 spots, 1 light bar): This ceiling smart track lighting kit in black includes two cylinder spotlights, a linear light bar, two 59.1 inch rails, a 39.4 inch rail, a PSU that sits in between two rails, and connectors to create an L shape that turns to the right. The specific rail lengths and the right-turn L shape determine where the kit fits on your ceiling. The PSU location between rails affects clearance and access.
Perifo L-shaped ceiling base kit (2 spots, 1 light bar)
Planning Your Kitchen Layout
Before you mount anything, confirm that your ceiling can accommodate the L shape. The two longer rails (59.1 inches each) form the arms of the L, and the shorter rail (39.4 inches) connects the turn. The L shape turns to the right, so plan the orientation accordingly.
Identify a corner where the kit will align with your kitchen island, counter, or dining area. The spotlights can be aimed at task zones, while the light bar provides ambient fill. Because the rails are fixed lengths, measure the corner distance from wall to wall to ensure the kit fits without overhang.
- Measure the corner: From the corner point, measure 59.1 inches along each wall to confirm clearance for the two long rails.
- Check the PSU position: The PSU sits between two rails, so ensure the ceiling area below it is accessible for maintenance and that the PSU does not block a light fixture.
- Orient the turn: The L shape turns to the right. If your kitchen corner requires a left turn, the kit may not fit without reversing the layout (which the connectors do not support).
Installation Considerations
Installation requires connecting the rails, mounting the PSU, and attaching the spotlights and light bar. The manufacturer requires a qualified installer for mains wiring if hardwiring is needed. The supplied information does not include step-by-step wiring instructions, so plan to have a licensed electrician handle any electrical connections. The kit is designed for ceiling mounting only; do not attempt to use it on a wall or sloped surface.
The spotlights and light bar connect to the track and can be repositioned along the rails. This flexibility lets you adjust the lighting after installation, but the initial placement of the PSU and rail connectors is fixed once mounted.
Lighting Zones for Your Kitchen
With two spotlights and one light bar, you can create three distinct lighting zones. Use the spotlights over a sink or prep area for task lighting. The light bar works well above a kitchen island or dining table for ambient light. Because the rails are long, you can space the fixtures apart to avoid shadows, but the total coverage is limited by the 59.1-inch arms. For a large kitchen, you may need an additional kit or a different configuration.
The kit does not include dimmer switches or motion sensors, but each fixture is compatible with the Philips Hue system, allowing app-based control and automation.
Trade-offs to Weigh Before You Buy
The L-shaped design is ideal for a single corner but does not adapt to other room shapes. The right-turn orientation means it cannot be mirrored without additional parts. The fixed rail lengths limit flexibility if your ceiling dimensions are non-standard. The PSU must be accessible, so avoid placing it above a cabinet or in a tight corner. For kitchens with multiple task zones, consider whether two spots and one light bar provide enough coverage or if a larger Perifo kit would suit better.
