Perifo L-Shaped Ceiling Kit with 3 Pendants: Layout and Care Tips
By Smart lights and home security | Philips Hue | Published: 2026-11-03
Category: Tips & Care
Plan your Perifo L-shaped ceiling kit with 3 pendants, then keep it looking sharp with a simple cleaning routine that protects the finish and the light.
Quick answer
Plan the L-turn first, then hang the three pendants at even spacing, and finish with a gentle dry-dust routine. The kit’s left-turning L shape and three 59.1-inch rails give you a fixed footprint, so layout decisions happen before you drill.
Why the L-turn direction changes your layout
The Perifo L-shaped ceiling base kit turns to the left. That fixed direction means you cannot mirror the layout to the right without a different kit. Before mounting, stand where you will enter the room and confirm the left turn sends the track where you want it. If the room’s main sightline comes from the opposite side, this kit may put the pendants in the wrong place.
Spacing three pendants on an L-shaped track
Three pendants on an L-shaped track need even visual rhythm, not necessarily equal distance from the corner. Place the corner pendant so it reads as part of the turn, then space the other two to balance the two arms. Check the spacing from below, standing at the room’s main entry point, because ceiling height and viewing angle change how even the gaps look.
Cleaning without damaging the finish
Dust the pendants and rails with a dry microfiber cloth before using any liquid. A dry cloth removes most surface dust without streaking. If you need more, dampen the cloth lightly and wipe the outside only, then dry immediately. Avoid abrasive pads and solvent cleaners, which can dull the white finish. Never spray liquid directly onto the fixture or into the connectors.
Layout and care steps
- Confirm the left turn works for your room: Stand at the main entry point and trace where a left-turning L will send the track. Mark the corner position on the ceiling with painter’s tape before drilling. If the left turn points the long arm into a walkway or away from the seating area, stop and reconsider the kit.
- Measure the full L footprint: Use the three 59.1-inch rails to lay out the two arms on the floor or a large template. Account for the PSU that sits between two rails, and mark the corner connector position. Check that the PSU location is reachable for any future service without dismantling the whole track.
- Space the three pendants for even rhythm: Place one pendant near the corner, then set the other two so the gaps on each arm look balanced from below. View the layout from the main entry point, not from directly underneath. Adjust spacing before final tightening; moving pendants after the track is fixed is harder.
- Dust weekly with a dry microfiber cloth: Wipe the outside of each pendant and the visible rail surfaces with a dry microfiber cloth. Work from the top down so dust does not fall onto clean surfaces. Skip liquid cleaners on the connectors and PSU; dry dusting is enough for routine care.
- Spot-clean only when needed: For fingerprints or smudges, dampen a microfiber cloth with water, wring it out well, and wipe the outside of the pendant. Dry immediately with a second cloth. Never spray liquid directly onto the fixture or into the track connectors.
Product facts
- Perifo L-shaped ceiling base kit (3 pendants): Includes three pendant lights, three 59.1 inch rails, a PSU that sits between two rails, and connectors for a left-turning L shape. The rail count and PSU position define the track footprint, so measure the full L before committing to pendant spacing.
Perifo L-shaped ceiling base kit (3 pendants)
