How to Install the Perifo Straight Wall Base Kit with Light Tube Compact

By Smart lights and home security | Philips Hue | Published: 2026-10-29

Category: How-to Guides

Learn how to install the Philips Hue Perifo Straight Wall Base Kit with a compact gradient light tube. This step-by-step guide covers mounting, wiring, and setup tips for a seamless track lighting experience.

Quick answer

Mount the rail, connect the power supply unit, attach the gradient light tube and spotlight, then pair with your Hue bridge via the app.

Before you begin: what the kit includes

The Perifo Straight Wall Base Kit comes with one compact gradient light tube, one cylinder spotlight, a 59.1-inch rail, and a PSU with a plug for a wall outlet. All hardware is black. The rail mounts directly to the wall, so you need a stud finder, a drill, and basic wiring tools. The PSU must be plugged into a standard wall outlet — no hardwiring required.

Choosing the right wall location

Pick a wall section that is at least 60 inches wide to accommodate the rail comfortably. Avoid areas with existing electrical boxes or plumbing behind the drywall. The rail works best above countertops, desks, or accent walls where you want directed light. Because the kit uses a plug-in PSU, you must place the rail within reach of an outlet.

Installation steps

1. Mark and drill mounting holes: Hold the rail against the wall at your desired height. Use a level to ensure it is straight. Mark the screw holes through the rail slots. Drill pilot holes and insert wall anchors (use drywall anchors if not hitting studs). Common mistake: skipping the level — the rail will look crooked once lights are attached. Always use a level and check for studs before drilling.
2. Mount the rail and connect the PSU: Screw the rail firmly to the wall using the provided screws. Attach the power supply unit (PSU) to the end of the rail. Plug the PSU into a wall outlet. Common mistake: overtightening screws can strip the rail holes or crack the plastic end caps. Hand-tighten screws; stop when snug.
3. Attach the gradient light tube and spotlight: Slide the compact gradient light tube onto the rail until it clicks. Then slide the cylinder spotlight onto the rail in your preferred position. Both should lock in place. Common mistake: forcing the lights onto the rail at an angle — align them straight before pressing. Ensure the rail slot is clean and free of debris before attaching lights.
4. Pair with the Hue bridge and configure: Open the Philips Hue app. Go to Settings > Add lights. The app should discover both fixtures automatically. Assign them to a room and adjust brightness or color scenes. Common mistake: forgetting to turn on the wall switch or breaker before pairing. Confirm power is on at the wall switch before starting the pairing process.

Product facts

Perifo straight wall base kit (1 spot, 1 light tube compact): This wall track lighting kit in black includes one compact gradient light tube, one cylinder spotlight, a 59.1 inch rail, and a PSU with a plug for a wall outlet. You get both ambient gradient light and a focused spotlight in one kit, but the rail length limits placement to walls with enough space and nearby outlets.
Perifo straight wall base kit (1 spot, 1 light tube compact)